Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 278 / 436

7 - 24
7. CONNECTION TO KOYO EI PLC
7.5 PLC Side Setting
7.5.2 Connecting to SU-5M/6M

Communication settings
Make the following settings using the programmer
system parameter setting.
*1 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
7.5.3 Connecting to DirectLOGIC 05
series or DirectLOGIC 06
series

Communication settings
Make the following settings using the programmer
system parameter setting.
*1 To use a PLC with multidrop, set the "RTS on delay time" to
5ms or more and the "RTS off delay time" to 2ms or more.
*2 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
7.5.4 Connecting to DirectLOGIC
205 series

Communication settings
Make the following settings using the programmer
system parameter setting.
*1 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
7.5.5 Connecting to PZ Series

Communication settings
Make the following settings using the programmer
system parameter setting.
*1 Indicates only the transmission speeds that can be set on
the GOT side.
Set the same transmission speed of the GOT.
For the transmission speed setting on the GOT side, refer to
the following.
7.4.1 Setting communication interface
(Communication settings)
Item Set value
Protocol CCM
Response delay time 0ms
Timeout Time
800ms/960ms/1200ms/1600ms/4000ms/
8000ms/16000ms/40000ms
Station No. 1 to 90
Transmission mode HEX
Stop bit 1bit, 2bits
Data bit 8bits (Fixed)
Parity NONE, ODD, EVEN
Transmission speed
*1
9600bps, 19200bps, 38400bps
Item Set value
Protocol CCM NET (DirectNET)
Timeout 780ms or more
RTS On Delay Time
0ms
*1
RTS Off Delay Time
0ms
*1
Station No. 1 to 90
Transmission speed
*2 9600bps, 19200bps, 38400bps
Stop bit 1bit, 2bits
Parity NONE, ODD, EVEN
Communication format HEX
Item Set value
Protocol CCM NET (DirectNET)
Station No. 1 to 90
Transmission speed
*1
9600bps, 19200bps, 38400bps
Data bit 8bits (Fixed)
Stop bit 1bit (Fixed)
Parity NONE, ODD
Self-diagnostic mode OFF
Response delay time 0ms
Peer to Peer OFF
Master/Slave Slave
Timeout Enable
Transmission mode HEX
MODBUS OFF
Item Set value
Protocol CCM NET
Timeout
800ms/960ms/1200ms/1600ms/4000ms/
8000ms/16000ms/40000ms
Response delay time 0ms
Station No. 1 to 90
Communication format HEX
Transmission speed
*1
9600bps, 19200bps, 38400bps
Stop bit 1bit
Parity NONE, ODD