Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 252 / 436

6 - 20
6. CONNECTION TO KEYENCE PLC
6.4 Device Range that Can Be Set
6.4 Device Range that Can Be Set
The device ranges of controller that can be used for GOT
are as follows.
Note that the device ranges in the following tables are the
maximum values that can be set in GT Designer3.
The device specifications of controllers may differ
depending on the models, even though belonging to the
same series.
Please make the setting according to the specifications of
the controller actually used.
When a non-existent device or a device number outside
the range is set, other objects with correct device settings
may not be monitored.

Setting item
(1) Communication driver: KEYENCE KV-700/1000
(2) Communication driver: Ethernet (KEYENCE),
Gateway
POINT POINT POINT
Device settings of KEYENCE PLC
(1) Setting setting procedure for relays (...), internal
auxiliary relays (MR), latch relays (LR) and control
relays(CR).
Make settings for status by a channel number and
a bit position.
Item Description
Device
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit
of word device.
Information
Displays the device type and setting range which are
selected in [Device].
Item Description
Device
Set the device name, device number, and bit number.
The bit number can be set only when specifying the bit of
word device.
Information
Displays the device type and its setting range selected in
[Device].
Network
Set the station number of the controller to be monitored.
Host
Select this item for monitoring the host controller.
Other
Select this item for monitoring other controllers.
After selecting, set the station number of the
controller to be monitored.
NWNo.: Set the network No.
Station No.: Set the station No.
Bit position
Channel No.