Mitsubishi Electric GOT 1000 Series, Connection Manual

Page: 200 / 436

4 - 28
4. CONNECTION TO OMRON PLC
4.2 Serial Connection
4.2.15 Connecting to connection
cable

Device settings
Write the following set values to devices of each PLC
CPU and initialize each port using a peripheral tool or
DM monitor.
*1 Only transmission speeds available on the GOT side are
shown.
*2 Set the same transmission speed of the peripheral port as
that of the GOT side.
*3 Set the peripheral port host link station No. according to the
Host Address on the GOT side.
HINT HINT HINT
Precautions for changing device values
Before changing the device values, make sure that the
switch settings have been changed as follows:
CPM2A: The communication condition switch to
"individual"
CPM2C: The communication port function switch to
"OFF"
4.2.16 Connecting to rack type host
link unit

Switch setting on C200H-LK201-V1
Set the switches accordingly.
(1) Setting Machine No. (SW1, SW2)
Set the Machine No. within the range of 00 to 31.
Set the station No. according to the Host Address on
the GOT side.
(2) Setting transmission speed (SW3)
Set the same transmission speed of the GOT.
*1 Only transmission speeds available on the GOT side are
shown.
Device name Set value
DM6650 0001
H
(fixed)
DM6651
DM6652 0000 (fixed)
DM6653
*3
0000 to 0031
b15 to b8 b7 to b0
1) RS-232C port transmission speed setting
*1*2
02
H
: 4800bps
03
H
: 9600bps
04
H
: 19200bps
2)
1)
2) RS-232C port communication frame format
03
H
(fixed): The settings are:
Start bit : 1 bit
Data length: 7 bits
Stop bit : 2 bits
Parity : Even bits
Rotary
switch
Description Settings
SW1
Machine No.
upper digit
( 10
1
)
0 to 3
SW2
Machine No.
lower digit
( 10
0
)
0 to 9
Setting
*1 Settings
4 4800bps
5 9600bps
6 19200bps
LK201-V1
RUN
RCV
XM
ERROR
SW1 SW2
SW3 SW4
Front Rear
1 2 3 4
ON
(4)
(1)
(3)
(5)
(1)
(2)
SW1 SW2
SW3