PR 5500 Instrument Manual
Extended Functions
Sartorius EN-353
[Recover]
t
t
Press the
key to select the line.
t
t
Press the
key/
OK
to confirm the selection.
t
y
The overwrite protection statuses are checked
(CAL switches and parameter ‚Settings locked‘).
t
y
This message appears if at least one CAL switch is
closed.
t
t
Open the CAL switch and press any key to check
the statuses again.
Or
t
t
Press the
EXIT
key to cancel the process and
return to the BIOS menu.
t
y
This message appears if the ‚W&M‘ parameter has
been set to another value besides ‚none‘ for at
least one weighing point and ‚Settings locked‘ has
been activated.
t
t
Press the
C
key three times and then press the
OK
key to reset the ‚W&M‘ parameter and
‚Settings locked‘.
t
y
The calibration check number changes.
Or
t
t
Press the
EXIT
key to cancel the process and
return to the BIOS menu.
Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
Page 406: ......