manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 336 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 336

Extended Functions 

PR 5500 Instrument Manual

EN-326 Sartorius

t

y

A selection window appears
Here is the software installed on the device and 
the software stored in network share connection 
(folder ‚Software‘) listed.
Select software see page 323.

t

t

Press [Start] soft key to start the updating.

t

y

A prompt window appears.

t

t

Press [Continue] soft key.

t

y

The software are updated on the device.

t

y

The device runs a cold start.

Update via FlashIt!

Requirements

 

-

The program “FlashIt!” (on the accompanying CD) 
is installed on the notebook/PC.

 

-

The device is connected to the notebook/PC 
directly or via network.

 

-

The software files are stored on the notebook/PC.

Procedure

t

y

A prompt window appears.

t

t

Press the [Continue] soft key.

t

y

A window appears on the display.

t

y

The device waits for the update to start on the 
notebook/PC.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments