manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 133 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 133

PR 5500 Instrument Manual 

Commissioning

Sartorius EN-123

5.6.6  Resetting Network

Note

Pressing the reset key during a long time (>5 sec.) triggers a cold start.

 

-

The settings will not be changed.

 

-

The database will be emptied.

 

-

Current process steps are deleted.

 

-

Application must be restarted.

 

-

The database must be restored.

Pressing the reset switch during a long time (>5 sec.) resets the network settings to default/factory settings.
That means:

 

-

LED will be switched on a second time.

 

-

‚DHCP‘ is activated.

 

-

Web server is enabled.

 

-

VNC access is enabled.

 

-

‚Host name’ is initialized e.g. PR5500-6B6A5E ( device type-MAC-ID).
Example of MAC-ID: 00-90-6C-

6B-6A-5E

This ensures that a valid address for identification of the instrument in the network can be assigned to the 
device, see Chapter 5.19.4.

Note

The last 3 bytes of the MAC ID are displayed. A label with the complete MAC ID is fitted 
to the outside of the device.
A device set to DHCP 

 (default/factory setting) and connected to an IT network 

(company network) with a DHCP server does not require further actions except for 
a 

2…3-minute waiting time

. Subsequently, a network connection is established 

automatically (device <-> workstation/PC).

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments