manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 135 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 135

PR 5500 Instrument Manual 

Commissioning

Sartorius EN-125

5.9  User Management

5.9.1  General Information

By means of the user management, the access to various menu levels of the instrument can be limited, if the 
necessity arises. This includes e.g. system set-up, system maintenance, access via the website and the various 
levels of the application (application-specific).

Note

The user management can be activated optionally. However, it is not required for normal 
operation.

During system installation and set-up, we recommend leaving the user management de-activated. This facilitates 
the access to the various menus and to the website.
Always activate the user management, if 

 

-

several persons work with the unit or have access to it.

 

-

the target is to prevent unauthorized persons from making changes to the unit or from influencing the 
processes controlled by the unit.

5.9.2  Activating User Management

User management is 

not

 activated by default.

t

t

Select and confirm the [System setup]-[User 
management] menu item.

t

y

A prompt window appears.

t

t

Press the corresponding soft key.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments