manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 104 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 104

Device Installation 

PR 5500 Instrument Manual

EN-94 Sartorius

4.4.9  PR 1721/64 DeviceNet

4.4.9.1  Specifications

The fieldbus card contains all functionalities to make a complete DeviceNet slave with a CAN controller and 
transmission speeds up to 500 kbps.
The card is inserted in the Option-1/FB slot, see Chapter 13.6.

Internal connection

Pin strip, 50-pin

External connection

5-pin terminal block (plug-in) in the module cover

Transmission rate

125, 250 and 500 kbps

Protocol

DeviceNet Master Slave
Polling procedure (polled IO)
CRC error recognition according to IEC 62026 (EN 50325)
Max. 64 station nodes
Data width max. 512 byte input & output

Configuration

EDS file 'sag_5500.eds'
MAC ID (1…62)

Cables

DeviceNet, color: petrol green
2x 2 screened twisted pair

Cable impedance

150 ¥

Bus termination

120 ¥ at the cable ends

Bus load

33 mA

Potential isolation

Optocoupler and DC/DC converter

Dimensions (LxWxH)

55x50x22 mm

Weight

Approx. 33 g

Certificates/Conformity

Compatible with DeviceNet specification Vol. 1: 2.0, Vol 2: 2.0
ODVA Certificate according to conformity test software version A-12
Industry-compatible CE, UL & cUL.

Note

The EDS file is stored on the CD supplied with the device (Fieldbus directory of the respective 
device). The current file is also available for download via the Internet:
http://www.sartorius-intec.com/en/products/software-tools/  
More -> Fieldbus-files

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments