manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 114 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 114

Device Installation 

PR 5500 Instrument Manual

EN-104 Sartorius

4.4.12  PR 1721/57 EtherNet-IP

4.4.12.1  Specifications

The fieldbus card is equipped with a standard RJ-45 socket for the Ethernet connection and contains a powerful 
TCP/IP and EtherNet IP connecting circuitry with transfer rates of 10 and 100 Mbps.
The card is inserted in the Option-1/FB slot, see Chapter 13.6.

Internal connection

Pin strip, 50-pin

External connection

RJ-45 connection socket in the module cover

Transmission rate

10 Mbps and 100 Mbps
Autodetection (10/100, HalfDX/FullDX)

Connection mode

Network

Protocol

EtherNet IP

Configuration

EDS file  
'sag_5500 ethernetip.eds'

Cables

Twisted pairs, screened e.g. patch cable CAT5 Autolink (straight or crossover)

Cable impedance

150 ¥

Cable length to HUB

Max. 115 m

Potential isolation

Yes

Dimensions (LxWxH)

55x50x22 mm

Weight

Approx. 33 g

Certificates

EtherNet IP Specification ODVA File No. 10286
Test Date: 06.09.2005
Vendor ID 90
See also: www.odva.org
Tested according to: CE, UL & cUL

Note

The IP address and the Subnet mask are set via the Fieldbus parameters (see also 
Chapter 5.19.6).
The EDS file is stored on the CD supplied with the device (Fieldbus directory of the respective 
device). The current file is also available for download via the Internet:
http://www.sartorius-intec.com/en/products/software-tools/  
More -> Fieldbus-files

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments