Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 301

Page: 301 / 407

PR 5500 Instrument Manual

Extended Functions

Sartorius EN-291

A prompt window appears.

Press [Continue] soft key.

The progress windows for the individual items
appear and then disappear in sequence.

As soon as the process is complete, an info
window appears.

Press the [OK] soft key to return to the [System
maintenance] menu.

6.1.3.2 Restoring Backup Data from USB Stick

Select and confirm [USB stick].

Note

If no USB stick is plugged in, a warning appears.

Plug in a USB stick and wait until the symbol appears in the info line.

Press the [Retry] soft key.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Search results

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500

Reviews:

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 301 / 407

Search results

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500

Reviews: