manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 221 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 221

PR 5500 Instrument Manual 

Commissioning

Sartorius EN-211

5.14.9.1  Deactivate Load Cell

t

t

Select and confirm the defect load cell to 
deactivate.

t

t

Press the [Accept] soft key.

t

y

The warning symbol replaces the weight unit. The 
simulation for the deactivated load cell is started.

Note

Trucks should only be allowed 
to move onto the center of the 
weighing platform, in order to 
distribute the weight evenly.

5.14.9.2  Activate Load Cell

t

t

After inserting and connecting the new load cell, 
select the line of the deactivated load cell and 
confirm.

t

t

Press the [Accept] soft key.

t

y

A search process is started.

t

y

Only then the new load cell is detected.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments