manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 309 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 309

PR 5500 Instrument Manual 

Extended Functions

Sartorius EN-299

t

t

Select and confirm  
[System maintenance]-[Import].

t

y

A selection window with available storage media 
appears.

Note

The connections to the share 
folders are only displayed if 
previously configured under 
[System setup]- [Network share 
connections].

6.1.5.1  Importing Data from USB Stick

t

t

Select and confirm [USB stick].

Note

If no USB stick is plugged in, a warning appears.

t

t

Plug in a USB stick and wait until the symbol   appears in the info line.

t

t

Press the [Retry] soft key.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments