Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 27 / 407

PR 5500 Instrument Manual Process Controller
Sartorius EN-17
Alphanumeric keypad
Toggle key
Pressing this will toggle between the following
input modes:
- Cursor
- Uppercase letters
- Lowercase letters
- Pinyin
When Chinese was selected or set under
[Operating parameters] - [Input method].
- Hepburn
When Japanese was selected or set under
[Operating parameters] - [Input method].
- Numbers
- Units
Double-click on the toggle key opens a small
selection window.
Select the unit with cursor keys  /  and
confirm with
OK
.
Input without character table
Pressing this once will display the first character,
e.g. 'A' in the cursor position. Pressing it twice
will display 'B' in the cursor position and three-
times will display 'C.'
Waiting approx. 2 seconds will complete the
character entry.
If only numeric values are required for input,
letters are not enabled.
You can delete the character to the left of the
cursor by pressing the Delete key
C
during entry.
Numerical value input (e.g. weight value):
Delete the content of the input field by pressing
the Delete key
C
.