Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 339

Page: 339 / 407

PR 5500 Instrument Manual

Extended Functions

Sartorius EN-329

6.1.11 Resetting the Device to the Factory Settings

Note

The device can only be reset to the factory settings when overwrite protection is deactivated;
see Chapter 5.1.5.

This function is required to reset the device to the
factory settings:

All calibration data

All system settings (including licenses and user
management)

All Alibi memory records

All database tables

Select and confirm
[System maintenance]-[Factory reset].

A prompt window appears.

Press the [Yes] soft key.

The device restarts with the factory settings.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Search results

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500

Reviews:

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 339 / 407

Search results

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500

Reviews: