manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 313 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 313

PR 5500 Instrument Manual 

Extended Functions

Sartorius EN-303

t

y

As soon as the process is complete, an info 
window appears.

t

t

Press the [OK] soft key to return to the [System 
maintenance] menu.

6.1.6  Alibi Memory Maintenance

This function is required to:

 

-

export a selection of data records from the Alibi memory to a storage media in XML format.

 

-

export a selection of data records from the Alibi memory to a storage media in XML format and then delete 
the data on the device.

 

-

print a selection of data records.

 

-

print a selection of data records and then delete the data on the device.

t

t

Select and confirm [System maintenance]-[Alibi 
memory maintenance].

6.1.6.1  Exporting a Selection of Data Records

This function is required to export a selection of data records to a storage media.

t

y

A selection window appears.

t

t

Select and confirm [Export selection of records].

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments