PR 5500 Instrument Manual
Extended Functions
Sartorius EN-327
The files are installed in the following order:
-
PR5x00-Firm xx
-
PR5x00-Bios xx (only when required for firmware)
-
Applikation (PR5x00-Basic xx in this case)
t
t
Double-click the corresponding file in the
“Explorer.”
t
y
“FlashIt!” opens and the file is displayed next to
[Select].
t
t
Select [Network].
t
t
Enter the device IP address (shown in the window
on the device display).
t
t
Click [Flash] to start the procedure.
t
y
A confirmation prompt appears when the Bios is
updated.
t
t
Click [OK].
t
y
The process starts now.
t
y
The window appears on the device display after
the file has been loaded onto the device.
t
t
The next files can then be loaded.
t
y
After the last file has been loaded, the window
appears again on the device display.
t
y
Press the Exit key to stop the flash process.
t
y
The device runs a cold start.
Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
Page 406: ......