manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 327 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 327

PR 5500 Instrument Manual 

Extended Functions

Sartorius EN-317

t

y

The service report file (PR5500-servicereport-
devicename-date + generated number.xml) 
is saved to the “Service reports” folder on the 
storage media (here: USB stick).

t

y

As soon as the process is complete, an info 
window appears.

t

t

Press the [OK] soft key to return to the [System 
maintenance] menu.

t

t

Remove the USB stick from the device and insert 
in a PC to send the file to customer service via 
e-mail.

6.1.9  Switching Off the Device

This function is required to disconnect the device from the power immediately, e.g., to install an option card. 
Before switching off, all data are stored on the SD card and automatically restored again after switching on.

 

-

The battery will be deactivated immediately.

 

-

The application will be closed.

Possible data loss!
If no SD card is inserted or the SD card is not detected, the data will not be saved after 

pressing the [Continue] soft key.
The SD card must be inserted and detected by the device.

! 

Caution

t

t

Select and confirm  
[System maintenance]-[Shutdown & Power off].

t

y

A prompt window appears.

t

t

Press the [Continue] soft key.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments