PR 5500 Instrument Manual
Commissioning
Sartorius EN-253
5.19.2 Setting the Date and Time
The parameters for date and time are set under this menu item.
t
t
Select and confirm [System setup] - [Date & Time]
using the cursor.
t
y
A selection window appears.
t
t
Select and confirm the individual parameters.
[Time zone]
Selection:
all existing time zones
[Local date]
Can be configured if ‘local hardware clock’ has
been selected under [Clock source].
Input: via keyboard
[Local time]
Can be configured if ‘local hardware clock’ has
been selected under [Clock source].
Input: via keyboard
[Clock source]
Selection:
local hardware clock, NTP server (Network Time
Protocol)
[NTP server]
The IP address can only be entered if under [Clock
source] ‘NTP server (Network Time Protocol)’ has
been selected.
Input: IP address via keyboard
[Last update]
Indicates when the last data was received by the
NTP server.
[
online]
The checkbox
indicates whether the NTP
server was successfully contacted during the last
attempt.
Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
Page 406: ......