manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 311 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 311

PR 5500 Instrument Manual 

Extended Functions

Sartorius EN-301

t

y

A prompt window appears.

t

t

Press [Continue] soft key.

t

y

The progress windows for the individual items 
appear and then disappear in sequence.

t

y

As soon as the process is complete, an info 
window appears.

t

t

Press the [OK] soft key to return to the [System 
maintenance] menu.

6.1.5.2  Importing Data from the shared Folder

Note

Connections to the shared folders are only shown when these have been configured under 
[System setup] - [Network share connections].

t

t

Here: select and confirm [Exports].

t

y

The content appears.

t

t

Navigate to, select and confirm the corresponding 
folder.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments