manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 324 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 324

Extended Functions 

PR 5500 Instrument Manual

EN-314 Sartorius

t

y

As soon as the process is complete, an info 
window appears.

t

t

Press the [OK] soft key to return to the [Alibi 
memory maintenance] menu.

6.1.7  SD Card Maintenance

t

t

Select and confirm  
[System maintenance]-[SD card maintenance].

6.1.7.1  Formatting the SD Card

This function is required to format the SD card or delete backups that are no longer needed.

t

y

A selection window appears.

t

t

Select and confirm [Format SD card] to format the 
SD card.

t

y

A prompt window appears.

t

t

Press the [Continue] soft key.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments