manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 306 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 306

Extended Functions 

PR 5500 Instrument Manual

EN-296 Sartorius

t

y

A selection window with available storage media 
appears.

Note

The connections to the share 
folders are only displayed if 
previously configured under 
[System setup]- [Network share 
connections].

6.1.4.1  Exporting Data to USB Stick

t

t

Select and confirm [USB stick].

Note

If no USB stick is plugged in, a warning appears.

t

t

Plug in a USB stick and wait until the symbol   appears in the info line.

t

t

Press the [Retry] soft key.

t

y

A selection window appears.

t

t

Check the appropriate box 

 or press the 

[All] soft key to select all possible items. Press the 
[None] soft key to de-select all selected items.

t

t

Press the [Start] soft key to start the process.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments