manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 320 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 320

Extended Functions 

PR 5500 Instrument Manual

EN-310 Sartorius

6.1.6.3  Printing a Selection of Data Records

This function is required to print a selection of data records.

Requirements

Printer is connected; see 5.19.1.4

Note

If no printer has been connected, the message "No printer configured" appears.

Procedure

t

y

A selection window appears.

t

t

Select and confirm [Print selection of records].

t

y

A window appears, displaying the available print 
range.

t

t

Press the [Browse] soft key to search for the first 
data record in the range.

t

y

A selection window appears.

t

t

Confirm the selection.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments