manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 282 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 282

Commissioning 

PR 5500 Instrument Manual

EN-272 Sartorius

5.19.8  License Settings

Licenses for functions and application programs are activated under this menu item. 

t

t

Select and confirm [System setup] - [License 
settings] using the cursor.

Activating an Application License

t

y

A selection/input window appears.
The nine-digit board number is displayed.

t

t

Enter the license number for the desired function/
application as a seven-digit number using the 
keyboard.

Note

License numbers are delivered 
with the device as a certificate 
and are valid only for this 
device/board number.

t

t

Press the [Save] soft key to save the entry.

Activating the Demo Mode

t

t

Press the [Demo mode] soft key to operate the 
selected application in demo mode.

t

y

A prompt window appears.

t

t

Press the [Continue] soft key to start demo mode.

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments