manualshive.com logo in svg

Minebea Sartorius Intec Maxxis 4 PR 5500, Instrument Manual, Page: 108 / 407

Share
Download
Minebea Sartorius Intec Maxxis 4 PR 5500 Instrument Manual Download Page 108

Device Installation 

PR 5500 Instrument Manual

EN-98 Sartorius

4.4.10  PR 1721/65 CC-Link

4.4.10.1  Specifications

The fieldbus card contains all functions to provide a complete CC link slave with transfer rates up to 10 Mbps.
The card is inserted in the Option-1/FB slot, see Chapter 13.6.

Internal connection

Pin strip, 50-pin

External connection

5-pin terminal block (plug-in) in the module cover

Transmission rate

156; 625 kbps; 2.5; 5; 10 Mbps

Protocol

CRC error detection, 128 I/O bits and 16 (32 bits) words, max. 64 stations

Configuration

CSP file 'PR1721_1.csp'

Cables

2x 2 screened twisted pair

Cable length

100 m @ 10 Mbps, 1200 m @ 156 kbps

Bus termination

110 ¥ at the cable ends

Bus load

100 mA

Potential isolation

Optocoupler and DC/DC converter

Dimensions (LxWxH)

55x50x22 mm

Weight

Approx. 33 g

Certificates/Conformity

CLPA Report BTP 03047, 
CC-Link Version 1.10.

Note

The CSP file is stored on the CD supplied with the device (Fieldbus directory of the respective 
device). The current file is also available for download via the Internet:
http://www.sartorius-intec.com/en/products/software-tools/  
More -> Fieldbus-files

Summary of Contents for Sartorius Intec Maxxis 4 PR 5500
























































































































































































































































































































































































































Reviews:

No comments