snmp-agent packet max-size
byte-count
The maximum size of the SNMP packet sent or received by the agent is configured.
----End
1.15.3 Checking the Configuration
After the maximum size of an SNMP packet is configured, you can view the configuration.
Prerequisite
The configurations of the Maximum Size of the SNMP Packet are complete.
Procedure
Step 1
Run the
display current-configuration
| include
max-size
command to view the current snmp
packet Maximum size.
----End
Example
Run the
display current-configuration
| include
max-size
command to view the current snmp
packet Maximum size.
<Quidway>
display current-configuration | include max-size
snmp-agent packet max-size 1800
1.16 Configuring Batch Statistics Collection
The frequent access of the NM Station to a switch affects the switch performance. To solve this
problem, you can configure the performance batch collection function to periodically collect
data needed by the NM Station on the switch and then sends the data to the NM Station through
the File Transfer Protocol (FTP).
1.16.1 Establishing the Configuration Task
1.16.2 Enabling Batch Statistics Collection
To create a statistics file, you must enable the performance batch collection function.
1.16.3 Creating a Statistics File
Data collected by the performance batch collection function are saved in the statistics file.
1.16.4 Adding Statistics Objects into the Statistics File
1.16.5 (Optional) Configuring the Statistics Collection Interval
1.16.6 (Optional) Configuring the Interval of Uploading the Statistic File
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-48
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
