Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
nqa
test-instance
admin-name
test-name
An NQA test instance is created and the test instance view is displayed.
Step 3
Run:
test-type
pwe3ping
The test type is set to PWE3 Ping.
Step 4
(Optional) Run:
vc-type
ldp
The method of setting up a PW is configured.
Step 5
Run:
local-pw-type
{
local-pw-type
|
ip-interworking
}
The type of the local PW is configured. By default, the type is Ethernet.
Step 6
(Optional) Run:
label-type
{
control-word
|
label-alert
|
normal
}
The type of the PW label is configured.
Step 7
Run:
local-pw-id
local-pw-id
The ID of the local end of the PW is configured.
Step 8
(Optional) Run the following commands to configure other parameters for the PWE3 Ping test:
l
To configure the response mode of the Echo packet, run the
lsp-replymode
{
no-reply
|
udp
|
udp-via-vpls
|
udp-router-alert
|
level-control-channel
} command.
l
To configure the LSP EXP value, run the
lsp-exp
exp
command.
Step 9
Run:
start
The NQA test is started.
Select the start mode as required because the
start
command has several forms.
l
To perform the NQA test immediately, run the
start
now
[
end
{
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
|
delay
{
seconds
second
|
hh
:
mm
:
ss
} |
lifetime
{
seconds
second
|
hh
:
mm
:
ss
} ]
command.
The test instance is started immediately.
l
To perform the NQA test at the specified time, run the
start
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
[
end
{
at
[
yyyy
/
mm
/
dd
]
hh
:
mm
:
ss
|
delay
{
seconds
second
|
hh
:
mm
:
ss
} |
lifetime
{
seconds
second
|
hh
:
mm
:
ss
} ] command.
The test instance is started at a specified time.
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-96
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
