![Huawei Quidway S9300 Configuration Manual - Network Management Download Page 605](http://html.mh-extra.com/html/huawei/quidway-s9300/quidway-s9300_configuration-manual-network-management_169487605.webp)
[Administrator-1-cluster]
quit
# Configure member switch 1.
[Member-1]
cluster enable
[Member-1]
cluster
[Member-1-cluster]
mngvlanid 10
[Member-1-cluster]
quit
# Configure member switch 2.
[Member-2]
cluster enable
[Member-2]
cluster
[Member-2-cluster]
mngvlanid 10
[Member-2-cluster]
quit
# Configure member switch 3.
[Member-3]
cluster enable
[Member-3]
cluster
[Member-3-cluster]
mngvlanid 10
[Member-3-cluster]
quit
After the topology collection function is enabled manually on the administrator switch, check
the device information collected through NTDP and you can find the MAC address and types
of related devices.
<Administrator-1>
ntdp explore
<Administrator-1>
system-view
[Administrator-1]
display ntdp device-list
The device-list of NTDP:
------------------------------------------------------------------------------
MAC HOP IP PLATFORM
------------------------------------------------------------------------------
0004-0004-0004 2 S9300
0003-0003-0003 1 S9300
0002-0002-0002 1 S9300
0001-0001-0001 0 S9300
Step 5
Create a cluster.
NOTE
Following steps can be performed only on the administrator switch.
# On the administrator switch, set the range of IP addresses that can be assigned to the cluster
to 10.0.0.0/8, in which the IP address assigned to the administrator switch is 10.0.0.1/8.
[Administrator-1]
cluster
[Administrator-1-cluster]
ip-pool 10.0.0.1 8
# Create a cluster named HUAWEI on the administrator switch.
[Administrator-1-cluster]
build HUAWEI
[HUAWEI_0.Administrator-1-cluster]
After the previous configuration, check information about the cluster to which the device
belongs. You can find that the device name is changed, the cluster name is HUAWEI, and the
management VLAN ID is 10.
[HUAWEI_0.Administrator-1-cluster]
display cluster
Cluster name:"
HUAWEI
"
Role:Administrator switch
management vlan id :
10
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join : disabled
Handshake timer:10 sec
Handshake hold-time:60 sec
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8 HGMP Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-109