![Huawei Quidway S9300 Configuration Manual - Network Management Download Page 257](http://html.mh-extra.com/html/huawei/quidway-s9300/quidway-s9300_configuration-manual-network-management_169487257.webp)
Context
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the
display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Procedure
l
Run the
display nqa results
[
test-instance
admin-name
test-name
] command to view the
test results on the NQA client.
l
Run the
display nqa-server
command to view the information about the NQA server.
----End
Example
Run the
display nqa results
command. If the test is successful, the following is displayed.
<Quidway>
display nqa results
NQA entry(admin, udp) :testflag is inactive ,testtype is udp
1 . Test 1 result The test is finished
Send operation times: 3 Receive response times: 3
Completion:success RTD OverThresholds number: 0
Attempts number:0 Drop operation number:0
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors number:0 RTT Stats errors number:0
Destination ip address:10.2.1.2
Min/Max/Average Completion Time: 32/109/67
Sum/Square-Sum Completion Time: 203/16749
Last Good Probe Time: 2006-8-5 16:9:21.6
Lost packet ratio: 0 %
Run the
display nqa-server
command. If the status of the NQA server is displayed, it means
that the configuration succeeds.
<Quidway>
display nqa-server
NQA Server Max: 5000 NQA Server Num: 1
NQA Concurrent TCP Server : 0 NQA Concurrent UDP Server: 1
nqa-server udpecho 10.112.58.3 3000 ACTIVE
6.14 Configuring the Jitter Test
This section describes how to configure a jitter test to check jitter on the network. You can
perform a jitter test only when both the client and the server are Huawei devices.
6.14.1 Establishing the Configuration Task
6.14.2 Configuring the Jitter Server
6.14.3 Configuring the Jitter Client
This part describes how to configure the client of the jitter test.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-37