ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
return
6.37.2 Example for Configuring the FTP Download Test
Networking Requirements
l
Switch B functions as the FTP server.
l
A user with the name
user1
and the password
hello
intends to log in to the FTP server to
download the
test.txt
file.
Figure 6-4
Networking diagram for configuring the FTP download test
SwitchA
SwitchB
GE1/0/0
VLANIF10
10.1.1.1/24
GE1/0/0
VLANIF10
10.1.1.2/24
FTP Client
Configuration Roadmap
The configuration roadmap is as follows:
1.
Configure Switch A as the NQA client.
2.
Create and perform the FTP test on Switch A to check whether a connection between
Switch A and the FTP server can be set up and to check the time for downloading a file
from the FTP server.
Data Preparation
To complete the configuration, you need the following data:
l
IP address of the FTP server
l
Source IP address for the test
l
FTP user name and password
l
Operation file of the FTP test
Procedure
Step 1
Configure the IP addresses of Switch A and Switch B. The configuration details are not
mentioned here.
Step 2
Configure Switch B as the FTP server.
<SwitchB>
system-view
[SwitchB]
ftp server enable
[SwitchB]
aaa
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-143
