manualshive.com logo in svg

Huawei Quidway S9300, Configuration Manual - Network Management

Share
Download
Huawei Quidway S9300 Configuration Manual - Network Management Download Page 349

6.34 Configuring Test Results to Be Sent to the FTP Server

This section describes how to configure the system to send test results to the FTP server to avoid
loss of test results in the event that the NMS does not poll the test result in time.

6.34.1 Establishing the Configuration Task

Before configuring the system to send test results to the FTP server, familiarize yourself with
the applicable environment, complete the pre-configuration tasks, and obtain the required data.
This can help you complete the configuration task quickly and accurately.

6.34.2 Configuring Parameters for Connecting the FTP Server

This part describes how to set parameters for accessing the FTP server that receives the test
results, such as address of the FTP server and user name and password for accessing the FTP
server.

6.34.3 Enabling the Function of Saving NQA Test Results Through FTP

The system can send test results to the FTP server only after the FTP server is enabled with the
test result saving function.

6.34.4 (Optional) Configuring the Number of Test Results Saved Through FTP

This part describes how to configure the number of test results that an FTP server can save.

6.34.5 (Optional) Configuring the Duration of Saving Test Results Through FTP

Each time, the system can send two test results to the FTP server. If the FTP server cannot
continue to write the file after being interrupted, a new file is created on the FTP server for the
test results sent each time.

6.34.6 (Optional) Enabling Alarms to Be Sent to the NM Station After the FTP Transmission
Succeeds

After test results are successfully saved on the FTP server, a trap message is sent to the NMS
for notification.

6.34.7 Starting the Test Instance

After you start a test instance, test results are field periodically.

6.34.8 Checking the Configuration

After configuring the system to send test results to the FTP server, you can view the
configuration.

6.34.1 Establishing the Configuration Task

Before configuring the system to send test results to the FTP server, familiarize yourself with
the applicable environment, complete the pre-configuration tasks, and obtain the required data.
This can help you complete the configuration task quickly and accurately.

Applicable Environment

In the test, the latest five test results can be saved by the system and earlier ones are overlapped.
Therefore, if the NM station does not perform result polling timely, test results will be lost. You
can send the statistics on the test results that reach the capacity of the local storage or periodically
send the statistics to the FTP server for storage through FTP. This can effectively prevent the
loss of test results and facilitate the network management based on the analysis of test results at
different times.

Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management

6 NQA Configuration

Issue 03 (2010-09-20)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

6-129

Summary of Contents for Quidway S9300























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands