After SNMPv1 is configured, you can check SNMP configurations.
1.3.1 Establishing the Configuration Task
Before configuring SNMPv1, familiarize yourself with the applicable environment, complete
the pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
To enable NM Station to manage the switch, configure basic SNMPv1 functions on the
switch.
Pre-configuration Tasks
Before Configuring SNMPv1, complete the following tasks:
l
Assigning an IP address to the switch
l
Configuring the routing protocol to make the switch and the NM Station accessible
Data Preparation
To configure SNMPv1, you need the following data.
No.
Data
1
SNMP version
2
SNMP community name
1.3.2 Enabling Basic SNMP Functions
By default, SNMP is disabled.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
snmp-agent
The SNMP agent function is enabled.
----End
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
