Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
snmp-agent sys-info
location
location
The location of the switch is configured.
----End
1.14.4 Checking the Configuration
After SNMP maintenance information is configured, you can view information about the
administrator and location of the device.
Prerequisite
The configurations of the SNMP Maintenance Information are complete.
Procedure
l
Run the
display snmp-agent sys-info
contact
command to view the contact method of the
administrator.
l
Run the
display snmp-agent sys-info
location
command to view the location of the
switch.
----End
Example
Run the
display snmp-agent sys-info
contact
command to view the contact method of the
administrator.
<Quidway>
display snmp-agent sys-info contact
The contact person for this managed node:
R&D Beijing, Huawei Technologies co.,Ltd.
Run the
display snmp-agent sys-info location
location
command to view the location of the
switch.
<Quidway>
display snmp-agent sys-info location
The physical location of this node:
Beijing China
1.15 Configuring the Maximum Size of the SNMP Packet
This section describes how to increase the maximum size of an SNMP packet for the NM Station
to obtain the complete information about the switch status.
1.15.1 Establishing the Configuration Task
1.15.2 Configuring the Maximum Size of the SNMP Packet
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-46
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
