snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info version v1 v3
#
return
1.23.2 Example for Specifying an NMS to Manage the Switch
Networking Requirements
, a reachable route exists between the NMS and the Switch. The IP
address of the NMS is 1.1.1.1/24; the interface connecting the Switch to the network resides on
2.2.2.2/24. The Switch can be remotely managed by the specified NMS.
To rectify faults quickly, you need to configure the contact method of the administrator and the
location information on the Switch.
The Switch needs to monitor the status of batch statistics collection. If the statistics collection
fails, the Switch should send a trap message to the NMS.
Figure 1-4
Networking diagram for specifying an NMS to manage the Switch
IP
Network
Switch
NM Station
1.1.1.1/24
GE1/0/0
VLANIF100
2.2.2.2/24
Configuration Roadmap
The configuration roadmap is as follows:
1.
Start the SNMP agent on the Switch.
2.
Set the SNMP version.
3.
Set the SNMP community name and access authority.
4.
Set the contact information about the administrator and the physical location of the
Switch.
5.
Configure the trap function.
6.
Configure the NMS.
Data Preparation
To complete the configuration, you need the following data:
l
SNMP version
l
Community name and access authority
l
Administrator information and location of the Switch
l
Number of an ACL
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-76
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
