No.
Data
3
Type of the PW
4
(Optional) Response mode of the Echo packets, LSP EXP, maximum hops, number
of probes, TTL value, and timeout period of the packets
5
Type and number of the interface connected with the CE
6
Start mode and end mode of the test
6.26.2 Configuring Parameters for the PWE3 Ping Test on a Multi-
Hop PW
This part describes how to set PWE3 ping test parameters for a multi-hop PW.
Context
Do as follows on the NQA client:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
nqa
test-instance
admin-name
test-name
An NQA test instance is created and the test instance view is displayed.
Step 3
Run:
test-type
pwe3ping
The test type is set to PWE3 Ping.
Step 4
(Optional) Run:
vc-type
ldp
The method of setting up a PW is configured.
Step 5
Run:
local-pw-type
{
local-pw-type
|
ip-interworking
}
The type of the local PW is configured. By default, the type is Ethernet.
Step 6
(Optional) Run:
label-type
{
control-word
|
label-alert
}
The type of the PW label is configured.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-99
