No.
Data
1
Name of the test instance
2
IP address of the multicast source
3
IP address of the destination host
4
(Optional)VPN instance
6.23.2 Creating an NQA MTrace Test
This part describes how to configure an MTrace instance before performing the MTrace test for
the RPF path from the multicast source to the destination host.
Context
Do as follows on the switch that functions as the NQA client:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
nqa
test-instance
admin-name
test-name
An NQA test instance is created and the test instance view is displayed.
Step 3
Run:
test-type
mtrace
The test type is set to MTrace.
Step 4
Run:
quit
Exit from the test instance view.
----End
6.23.3 Configuring the NQA MTrace Test
This part describes how to set parameters for the MTrace test for the RPF path from the multicast
source to the destination host.
Context
Do as follows on the switch with the MTrace test instance being created:
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-83
