No.
Data
1
Manager and name of the NQA test instance
2
Destination MAC address of the NQA test instance
3
Maintenance domain (MD) and maintenance association (MA) of the NQA test
instance
4
Starting and ending modes of the NQA test instance
6.15.2 Setting Parameters for the MAC Ping Test
Context
Do as follows on the NQA client.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
cfm enable
The CFM is enabled globally.
Step 3
Run:
nqa
test-instance
admin-name
test-name
An NQA test instance is created and the test instance view is displayed.
Step 4
Run:
test-type
macping
The test type is set to MAC Ping.
Step 5
Run:
destination-address
mac
mac-address
The destination MAC address of the MAC ping test is configured.
Step 6
Run:
md
md-name
ma
ma-name
The MD and the MA are specified.
Step 7
(Optional) Run the following commands to set other parameters for the MAC Ping test.
l
Run:
interval
seconds
interval
The interval for sending test packets is set.
l
Run:
fail-percent
percent
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-43
