manualshive.com logo in svg

Huawei Quidway S9300, Configuration Manual - Network Management

Share
Download
Huawei Quidway S9300 Configuration Manual - Network Management Download Page 334

l

Run:

description

 

string

The description is configured for the NQA test instance.

l

Run:

destination-address

 

ipv4

 

ip-address

The destination IP address is set for the NQA test instance.

NOTE

This parameter cannot be configured for DNS test instances. In the case that the lable-type of PWE3
Ping or PWE3 Trace is normal or lable-alert, This parameter can be configured for PWE3 Ping and
PWE3 Trace.

l

Run:

destination-address

 

url

 

urlstring

The destination URL address is set for the NQA test instance.

NOTE

The destination URL address can be configured for DNS and HTTP test instances.

l

Run:

destination-port

 

port-number

The destination port number is set for the NQA test instance.

NOTE

The destination port number can be configured only for UDP, Jitter, TCP, Trace, FTP, and HTTP test
instances.

l

Run:

dns-server

 

ipv4

 

ip-address

The DNS server address is configured for the NQA test instance.

NOTE

The DNS server address can be configured only for DNS and HTTP test instances.

l

Run:

fail-percent

 

percent

The failure percentage is set for the NQA test instance.

NOTE

This parameter cannot be configured for Trace, FTP, DNS, LSP Trace, PWE3 Trace, and MTrace test
instances.

l

Run:

frequency

 

interval

The test period is set for the NQA test instance.

l

Run:

ftp-filename

 

file-name

The file name and file path are configured for the FTP test instance.

NOTE

The file name and file path can be configured only for the FTP test instance.

l

Run:

ftp-filesize

 

size

The size of the file is set for the FTP test instance.

6 NQA Configuration

Quidway S9300 Terabit Routing Switch

Configuration Guide - Network Management

6-114

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

Issue 03 (2010-09-20)

Summary of Contents for Quidway S9300























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands