Data Preparation
To configure the threshold for the NQA alarm, you need the following data.
No.
Data
1
Number of the event corresponding to the threshold
2
Number of the alarm threshold
3
Upper threshold
4
Lower threshold
6.35.2 Configuring the Event Corresponding to the Alarm
Threshold
This part describes the actions that the system needs to perform in response to the threshold
exceeding, such as generating logs, generating traps, or generating logs and traps.
Context
Do as follows on the NQA client:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
nqa event
event-entry
{
log
|
trap
|
log-trap
|
none
} [
description
]
The event number and the corresponding event are configured.
----End
6.35.3 Configuring the Alarm Threshold
This part describes how to configure the events triggered when the number of test results exceeds
the threshold.
Context
Do as follows on the NQA client:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6 NQA Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-135
