Figure 8-4
Networking diagram of configuring the interconnection of FTP servers and devices
in and out of the HGMP cluster (in NAT Mode)
IP/MPLS
core
......
FTP Server
2.0.0.1/8
SFTP Server
2.0.0.2/8
NM station
3.0.0.1/8
Log station
4.0.0.1/8
Administrator-1
10.0.0.1/8
Member-1
Member-2
Member-3
10.0.0.4/8
GE1/0/1
GE1/0/2
GE1/0/1
GE1/0/2
GE1/0/1
GE1/0/1
Cluster
GE1/0/3
GE1/0/1
1.0.0.2/8
Device
MAC Address
Device
MAC Address
Administrator-1
0001-0001-0001
Member-1
0002-0002-0002
Member-2
0003-0003-0003
Member-3
0004-0004-0004
Configuration Roadmap
The configuration roadmap is as follows:
1.
Create a cluster and configure basic HGMP functions for the cluster according to the steps
described in the section "
Example for Configuring Basic HGMP Functions for a
."
2.
For the situation that Member-3 accesses the FTP server (2.0.0.1/8) out of the cluster:
l
Run the
cluster-ftp
command on the member switch to set up a connection with the
public FTP server of the cluster.
3.
For the situation that a device out of the cluster accesses the FTP server (Member-2):
l
Calculate the port number reserved on the administrator switch for the FTP protocol of
a certain member switch in the cluster.
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-44
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
