Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join : disabled
Handshake timer:10 sec
Handshake hold-time:60 sec
IP pool:10.0.0.1/8
Logging host:4.0.0.1
SNMP host:3.0.0.1
FTP server:2.0.0.1
SFTP server:2.0.0.2
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 4 member(s) in the cluster, and 0 of them are down.
Step 10
Restart member switches in batches.
# Run the
cluster-member reboot group-by member-number 2 to 3
command on the
administrator switch to restart Member-2 and Member-3.
[HUAWEI_0.Administrator-1]
cluster
[HUAWEI_0.Administrator-1-cluster]
cluster-member reboot group-by member-number 2
to 3
Info: This command will take members reboot.
Are you sure?[Y/N]y
Step 11
Verify the configuration.
Run the
display member-reboot-stat
command on administrator switch to check the restart
status of the member switches, and you can view that
success
is displayed, which indicates that
the specified member switches are restarted successfully.
[HUAWEi_0.Member-2]
display member-reboot-stat
The result of member switchs rebooting:
------------------------------------------------------------------------
SN Device MacAddress IPAddress Result
------------------------------------------------------------------------
1 S9300 0003-0003-0003 10.0.0.3
success
2 S9300 0004-0004-0004 10.0.0.4
success
----End
Configuration Files
l
Configuration file of Administrator-1.
#
sysname Administrator-1
#
vlan batch 10
#
cluster enable
ntdp enable
ntdp hop 3
ntdp timer 10
ndp enable
#
interface Vlanif10
ip address 1.0.0.1 255.0.0.0
#
interface gigabitethernet1/0/1
port link-type trunk
port trunk allow-pass vlan 10
ntdp enable
ndp enable
#
interface gigabitethernet1/0/2
port link-type trunk
port trunk allow-pass vlan 10
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-102
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
