6.6.1 Establishing the Configuration Task
Before configuring an FTP download test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP download test, the local device functions as an NQA FTP client, intending to download
the specified file from an FTP server.
The test result contains statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
Pre-configuration Tasks
Before configuring the FTP download test, complete the following tasks:
l
Configuring the FTP user name and password and the login directory
l
Configuring routes between the NQA FTP client and the FTP server
Data Preparation
To configure the FTP download test, you need the following data.
No.
Data
1
Administrator name and test name
2
IP address of the FTP server
3
(Optional) Source IP address of the FTP operation and VPN instance name and source
and destination port numbers of the FTP operation
4
FTP user name and password
5
Name of the file to be downloaded
6
Start mode and end mode of the test
6.6.2 Configuring the FTP Download Test Parameters
This part describes how to set parameters for the FTP download test.
Context
Do as follows on the NQA client (FTP client):
Procedure
Step 1
Run:
system-view
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-12
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
