The NetStream function supports the collection of statistics about inbound and outbound packets
separately.
Step 4
(Optional) Run:
ip netstream suppress
suppress-rate
{
inbound
|
outbound
}
The suppression ratio of the packets on the interface is set.
By default, the suppression ratio on interfaces is 1000.
The suppression ratio is used for traffic sampling. After the suppression ratio is set, the S9300
does not sample the packets that are filtered out in the suppression.
Step 5
(Optional) Run:
ip netstream sampler
fix-packets
packet-interval
{
inbound
|
outbound
}
The fixed-packets sampling ratio on the interface is set.
By default, the fixed-packets sampling ratio on an interface is 1000:1.
----End
7.5.3 (Optional) Configuring the Version of Exported Packets
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
ip netstream aggregation
{
as
|
as-tos
|
destination-prefix
|
destination-prefix-
tos
|
prefix
|
prefix-tos
|
protocol-port
|
protocol-port-tos
|
source-prefix
|
source-prefix-tos
}
The NetStream aggregation view is displayed.
Step 3
(Optional) Run:
export version
version
The version of the exported packets is configured.
By default, the version of the exported packets is V8.
----End
7.5.4 (Optional) Configuring the Export of Statistics
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
ip netstream aggregation
{
as
|
as-tos
|
destination-prefix
|
destination-prefix-
tos
|
prefix
|
prefix-tos
|
protocol-port
|
protocol-port-tos
|
source-prefix
|
source-prefix-tos
}
7 NetStream Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
7-14
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
