8.2.7 (Optional) Deleting a Member Switch
If you do not need to use a cluster to manage a switch in a management domain, you can delete
the switch from the cluster.
Context
If you do not need a cluster to manage a switch, you can delete the member switch from the
cluster.
Do as follows only on the administrator switch:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
cluster
The cluster view is displayed.
Step 3
Run:
delete-member
member-number
A member switch is deleted from the cluster.
----End
8.2.8 Checking the Configuration
After configuring basic HGMP functions, you can view the configuration.
Prerequisite
The configurations of the Basic HGMP are complete.
Procedure
l
Run the
display ndp
to check the NDP configuration in the system view.
l
Run the
display ndp interface
{
interface-type
interface-number
[
to
interface-type
interface-number
] }&<1-10> to check the neighbor information detected through NDP on
a specified interface.
l
Run the
display ntdp
to check the global NTDP settings.
l
Run the
display ntdp device-list
[
verbose
] to check the device information collected
through NTDP.
l
Run the
display cluster
to check the status and statistics of cluster.
l
Run the
display cluster candidates
[
mac-address
mac-address
|
verbose
] to check
information about candidate switches.
l
Run the
display cluster members
[
member-number
|
verbose
] to check information about
member switches.
----End
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8 HGMP Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-17
