Prerequisite
The configurations of the PWE3 Trace Test function are complete.
Context
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the
display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
Procedure
Step 1
Run the
display nqa results
[
test-instance
admin-name
test-name
] command to view the test
results on the NQA client.
----End
Example
Run the
display nqa results
command. If the PWE3 Trace test on the multi-hop PW is
successful, the following information is displayed.
l
Statistics about errors
–
Number of unroutable connections
–
Number of wrong sequence numbers
–
Timeout times of the test packets
l
History statistics of each test packet
–
Timestamp added when each test packet is sent
–
Timestamp added when each test packet is received
–
Packets status displayed on the NQA client
l
Statistics of results of each test
–
Number of successful tests
–
Sum of the response time of all tests
–
RTT square sum
–
Minimum RTT and maximum RTT of the packet
–
Destination IP address and the type of the destination IP address
–
Number of the Echo packets and the sent packets
–
Time when the last packet is received
<Quidway>
display nqa results
NQA entry(admin, pwe3trace) :testflag is inactive ,testtype is pwe3trace
1 . Test 1 result The test is finished
Completion:success Attempts number:1
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors number:0 RTT Stats errors number:0
Drop operation number:0
Last good path Time:2009-2-28 10:58:35.5
1 . Hop 1
Send operation times: 3 Receive response times: 3
Min/Max/Average Completion Time: 4/10/7
Sum/Square-Sum Completion Time: 23/197
RTD OverThresholds number: 0
6 NQA Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
6-108
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
