Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
snmp-agent sys-info
version
v2c
The SNMP version is configured.
By default, only SNMPv3 is configured.
----End
1.4.4 Setting the SNMP Community Name
This part describes how to implement access right control by setting the SNMP community
name.
Context
Do as follows on the switch enabled with the SNMP agent.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
snmp-agent community
{
read
|
write
}
community-name
The community name of the agent is configured.
----End
1.4.5 Checking the Configuration
After SNMPv2c is configured, you can check the SNMP configurations, including the
community name and version information.
Prerequisite
The configurations of the Basic Functions of SNMPv2c are complete.
Procedure
l
Run the
display snmp-agent community
command to view the community name of the
agent.
l
Run the
display snmp-agent sys-info
version
command to view the SNMP version
information.
----End
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-10
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
