The cluster view is displayed.
3.
Run:
cluster-member unrelated-port
[
group-by
{
device-type
device-type
|
ip
{
ip-address
[
to
ip-address
] } &<1-10> |
member-number
{
member-number
[
to
member-number
] } &<1-10> } ] {
ndp
|
ntdp
}
NDP or NTDP is disabled on unrelated interfaces.
–
Only the last command execution result is saved.
–
The member selection mode can be device type-based, member switch ID-based,
IP address-based, or all.
–
This command can be performed only after the cluster is enabled.
----End
8.3.4 Checking the Configuration
After configuring advanced HGMP functions, you can view the configuration.
Prerequisite
The configurations of the Advanced HGMP are complete.
Procedure
l
Run the
display cluster-increment-result
to check the delivery of incremental
configuration.
l
Run the
display cluster-license
to check the cluster license.
l
Run the
display cluster-topology-info
to check the cluster topology.
l
Run the
display increment-command
to check the incremental configuration command.
l
Run the
display increment-synchronization-result
to check whether configuration files
of member switches are synchronized to the FTP server.
l
Run the
display member-getfile-stat
to check whether member switches successfully
obtain configuration files, version files, or patch files.
l
Run the
display member-interface-state
{
ndp
|
ntdp
} to check the status of NDP or
NTDP on unrelated interfaces of member switches.
l
Run the
display member-reboot-stat
to check whether member switches are restarted
successfully.
l
Run the
display member-save-stat
to check whether member switches successfully save
the current configurations to the FTP server
l
Run the
display synchronization-result
to check whether member switches successfully
synchronize configuration files to the FTP server.
----End
Example
If the incremental configuration command is successfully delivered to member switches, run the
display cluster-increment-result
command, and you can view that
success
is displayed.
<HUAWEI_0.Quidway>
display cluster-increment-result
The result of member switches executing increment commands:
------------------------------------------------------------------------------
8 HGMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8-28
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
