Context
The system starts statistics collection when the statistics collection interval expires.
NOTE
You can set the statistics collection interval, when the statistics file was in the stop state.
Do as follows on the switch.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
bulk-file
file-name
The bulk-file view is displayed.
Step 3
Run:
collect interval
interval
The statistics collection interval is set.
By default, the interval for saving the statistics into the collection file is set to 5 minutes.
----End
1.16.6 (Optional) Configuring the Interval of Uploading the
Statistic File
This part describes how to set the interval for uploading the statistics file. When the upload
interval expires, the system uploads the statistics file to the NM Station.
Context
The system uploads the statistics file to the NM Station when the interval of uploading the
statistic file expires.
Do as follows on the switch.
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
bulk-file
file-name
The bulk-file view is displayed.
Step 3
Run:
transfer interval
interval
1 SNMP Configuration
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
1-52
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-09-20)
