Huawei NetCol8000-A045 User Manual Download

Page: 90 / 369

NO TE

● Do not remove the bolts directly.
● Put away the removed transport fasteners so that you can reinstall them if the indoor

unit is to be transported again.

Step 2 Remove the transport fasteners.

Step 3 Tighten the bolts on the compressor again to a torque of 12 N·m.

----End

4.4.3 Securing the Indoor Unit

Procedure

Step 1 (Optional) Make the base.

Step 2 Place the smart cooling product cabinet onto the base and align the cabinet

mounting holes with the base mounting holes.

Step 3 Secure the cabinet using the M12 bolts in the fittings bag.

Figure 4-33 Securing the cabinet

----End

4.5 Installing an Outdoor Unit

4.5.1 Checking the Outdoor Unit Pressure

Context

Before delivery, outdoor units are injected with nitrogen to 0.2–0.6 MPa. Before

connecting pipes, the nitrogen inside pipes must be discharged.

NetCol8000-A(045, 055, 060, 090, 120) In-room Air

Cooled Smart Cooling Product

User Manual

4 System Installation

Issue 05 (2020-10-10)

Summary of Contents for NetCol8000-A045


















































































































































































































































































































































































Search results

Summary of Contents for NetCol8000-A045

Reviews:

Related manuals for NetCol8000-A045

Brands by name

Popular brands

Huawei NetCol8000-A045, User Manual

Search results

Summary of Contents for NetCol8000-A045

Reviews:

Related manuals for NetCol8000-A045

Brands by name

Popular brands