Figure 11-6 Removing the fan drive (downflow, NetCol8000-A060D used as an
example)
Step 4 Pull out the handle and remove the fan drive from the subrack, as shown by 2 in
.
Step 5 Install a new fan drive, insert it into the corresponding slot, and flip the buckle
downwards to lock the module.
Step 6 Turn on the smart cooling product switch in the PDF.
Step 7 Switch on the QF1 and QF2, and close the front door.
Step 8 After the home screen is displayed, check that the smart cooling product is
running properly and no alarm is generated.
----End
11.5 Replacing a Wet Film Humidifier
Prerequisites
●
A wet film humidifier needs to be replaced.
●
A spare humidifier pump of the same model is available and functional.
Procedure
Step 1 Tap Shutdown on the home screen and turn off the smart cooling product switch
in the PDF.
NO TICE
Exercise caution because the device is still energized after it is shut down on the
home screen.
NetCol8000-A(045, 055, 060, 090, 120) In-room Air
Cooled Smart Cooling Product
User Manual
11 Parts Replacement
Issue 05 (2020-10-10)
Copyright © Huawei Technologies Co., Ltd.
262