background image

Figure 12-11 LAN IP Settings

NO TE

● If the LAN IP address of the unit has not been changed, the LAN IP address of each

unit in the group is reallocated when the Teamwork function is enabled.

● If the LAN IP address of the unit has been changed, the LAN IP address of the unit

remains unchanged when the Teamwork function is enabled.

● The LAN IP address must be in the 192.168.248.X network segment.

----End

12.3.2 How Do I Check Temperature and Humidity Curves?

Context

On the T/H Curve screen, the temperature and humidity curves show the recent

temperature and humidify changes. You can choose to display the curves in recent

one hour, one day, seven days, or 30 days.

Procedure

Step 1 Tap T/H Curve on the home screen.

Figure 12-12 T/H Curve screen

NetCol8000-A(045, 055, 060, 090, 120) In-room Air

Cooled Smart Cooling Product

User Manual

12 FAQ

Issue 05 (2020-10-10)

Copyright © Huawei Technologies Co., Ltd.

292

Summary of Contents for NetCol8000-A045


















































































































































































































































































































































































Reviews: